Large bore joints and hoses for mining are connected in snapshot and disassembly form. The tension hose joint is simple in structure, reliable, small in size, convenient in processing. The size of the push hose 255 compression directly affects the joint connection performance. The quick-mount hose assembly has a non-removable fixed pipe joint that creates a large clamping force between the rubber layer and the joint, and the seal of the joint passes through the inner rubber layer and the inner rubber of the hose. Layer deformation complete.
Connection strength A certain amount of compression is obtained by directly pressurizing the coating to hold the braided (or wound) wire in place. The high pressure hose is composed of three main parts, the inner viscosity, the reinforcing layer and the outer tucker house, which have an important impact on the performance and life of the hose, ensuring the strength, sealing and stability of the high pressure hose. The inner rubber layer is located on the inside of the hose, ensuring the seal of the high-pressure hose and protecting the support reinforcement (wire) from the working fluid. The reinforcing layer consists of (or wound) located between the inner rubber layer and the outer rubber layer, and the external adhesive layer protects the high-pressure hose from external factors to ensure the strength stability of the high-pressure hose and good pulling. Expand.
